How to Do Something Your Don Know: How to Paint Stripes on a Wall

Painting stripes on your wall is a great way to change up a room without doing expensive remodeling. Stripes look wonderful on an accent wall in a large room, or they can cover all of the walls in a small room, like a bathroom. When you’re deciding where and how to paint stripes, you should pick between horizontal or vertical stripes, and then you can mark the design on the wall with tape and begin painting!

EditSteps

EditPicking a Design and Base Color

Choose between horizontal or vertical stripes. Look around your room and decide where you’d like to paint the stripes. If you want the room too look longer or wider, opt for horizontal stripes. To make your ceilings look taller, go for vertical stripes that reach the top of the wall. If there are fixtures on the wall, like lights or windows, remember that they will interrupt the stripes and can lessen the visual effect.^[1]
- Don’t be afraid to get creative when it comes to picking a pattern. You can even do diagonal stripes for an interesting and eye-catching design. You can also go out of the box with a chevron design or stripes of varying widths.
Pick 2-3 coordinating colors for the stripes. Once you decide on a design, choose a color scheme for the stripes. Opt for monochromatic warm tones, like red, orange, yellow, brown, cream, or tan, for an inviting and cozy space. If you want to make a bolder statement, go for cool, contrasting shades, like blue, purple, black, white, or silver.^[2]
- If you’re having trouble figuring out your shades, consult a color wheel for assistance, or look at photos of striped walls online for some inspiration.
Remove all furniture from the room and lay down a drop cloth. If you’re painting the entire room with stripes, move as much furniture as possible out of the room. If you’re only painting one wall, push any furniture that’s on that wall into the middle of the room. Then, lay down drop cloth or plastic to prevent paint drips from staining your floor or carpeting.^[3]
- You should also remove anything that’s hanging on the walls that you will be painting, like pictures or shelves. This will ensure that you get crisp, clean stripes with no interruptions.
Paint the entire wall with 2 coats of your base color. Choose the lightest shade in your color scheme for the base, since it will be easier to paint over a light hue than a dark one. Use a roller to apply the first coat of paint evenly, and let it dry for 24 hours. Then, apply a second coat with the roller for more coverage.^[4]
- If the wall is already a color that’s part of your scheme, you don’t have to apply fresh paint.
Let the base coat dry for 48 hours before marking and taping. After you apply the 2nd coat of paint, let the paint dry completely before you begin the process of adding stripes. This will help to prevent chipping or peeling of the base color when you remove the tape from the stripes.^[5]
- If the paint isn’t dry when you begin marking and taping, you can smear the paint and ruin your stripes. Be patient!

EditMarking and Taping the Stripes

Measure the wall and divide by the number of stripes to find the width of each. If all of your stripes are going to be the same width, use a tape measure to find the length or height of the wall. For vertical stripes, measure the length of the wall, and for horizontal stripes, measure the height. Then, divide the measurement by the number of stripes you’d like to have.^[6]
- For example, if you have a wall that is long and you want to paint 16 vertical stripes, you would divide by 16 to find that each stripe should be wide.
- If you're doing chevron stripes, you'll still measure the wall the same way to decide where to start the stripes.
Use a ruler to mark the sides of the stripes on the wall. Start at the top left corner of the wall and measure down for horizontal stripes or to the right for vertical stripes, measuring the width of 1 stripe. Mark a small “X” with a pencil, and measure the width of another stripe from that mark, continuing until you’ve marked and marked the edges of each stripe. Once you finish one side, move to the opposite side of the wall and repeat the process.^[7]
- For instance, for 16 vertical stripes on a wall that is long, you would mark the edges of each stripe with of space between the marks along the top of the wall. Once you’ve marked all of them, you would do the same along the bottom of the wall.
- For chevron stripes, you should also mark the high and low points of each stripe, keeping an equal distance between the top of the strip and the bottom of the stripe.
Connect the marks for the edges of the stripes with a level. Use a carpenter’s level or a laser level to line up the markings on the top and bottom or left and right side of the wall so they’re perfectly straight. Then, run your pencil along the level lightly to make a straight line, which will be the edge of your stripe.^[8]
- If you don’t have a level, you can have 2 people hold the ends of a tape measure in place and carefully run your pencil along the tape measure to connect the markings.
- If you're painting chevron stripes, hold the level at an angle to connect the dots at the high and low points of each stripe, making a zig-zag pattern.
Lay painter’s tape over the lines and press down firmly on the tape. Lay the tape so that it sits just outside of the line that you marked for the stripes, creating stripes that are the correct width. This will ensure that none of the paint gets onto the base color and that all of the stripes are the correct width. Then, run your hands down the tape, pressing firmly to prevent the paint from bleeding under the tape.^[9]
- If you’re worried about the paint bleeding, run the edge of a credit card firmly over the tape to press it down onto the wall. This will create a stronger seal.
- For chevron stripes, your tape lines should meet at the high and low points of the stripe.

EditAdding the Stripes

Paint around the perimeter of the stripes with a mostly dry paint brush. Dip a medium-sized dry paint brush into the color that you want your stripe to be, and let the paint drip off of the brush until it’s mostly dry. Then, paint along the tape on the inside of the stripe to make a large rectangle, also known as “cutting in” the shape, which helps to prevent bleeding when you use a roller.^[10]
- You only need to apply 1 coat of the perimeter paint to prevent bleeding before you use a roller.
- Don’t be afraid to get some paint on the tape, but be careful not to get it on the areas where you want the base color to show!
Use a small roller to apply 2 coats of paint on the stripes for even coverage. Dip a small, medium-nap roller into your paint, and roll it out a little on a piece of cardboard or a paint tray. Then, use long, even strokes to apply the paint to the stripe, working on 1 stripe at a time. Once you’ve completed the first coat on all the stripes, let the paint dry for 24 hours and apply a second coat.^[11].
- The smaller the roller, the more control you have over where the paint goes. Rollers create a smoother, fuller finish than paint brushes.
Let the walls dry overnight and peel off the tape. After applying the 2nd coat of paint, allow the stripes to dry almost completely. When the paint is still slightly wet, lift one end of the tape, and pull off the tape at a 45-degree angle from the wall. Work smoothly and quickly to avoid pulling off the paint or chipping the base.^[12]
- If you pull off the tape when the paint is completely dry, you risk chipping or peeling the stripes.
- If you do have some chips or peeling, wait until the paint is dry and then use a small paint brush to touch up the color as much as possible. You may need to re-apply the tape to get a crisp line for your stripes when doing touch-ups.