Tuesday, 15 December 2020

How to Make Your Own Body Lotion

Making homemade body lotion is a fun project that you can complete in less than an hour! The ingredients are easy to get your hands on and all you need is a blender to combine them. This recipe is gentle and fragrance-free, making it safe to use on sensitive skin, but you can easily incorporate a subtle scent using your favorite essential oils. If you’re making large batches of lotion to sell commercially, consider adding skin-safe mica, oxides, or specialty extracts to make your product colorful and unique.

[Edit]Ingredients

[Edit]Simple Fragrance-Free Body Lotion

  • 1 cup (230 grams) of unrefined, 100% organic shea butter
  • of coconut oil
  • of vegetable glycerin
  • of vitamin E oil
  • 2 ounces (60 ml) of extra virgin olive oil
  • 1 teaspoon (3 ml) of essential oil (optional)
  • Skin-safe mica, oxide, or powdered pigments (optional)
  • Specialty extracts for added properties (optional)

Makes about 20 ounces (600 ml) of body lotion

[Edit]Steps

[Edit]Making a Simple Body Lotion

  1. Scoop 1 cup (230 grams) of shea butter into a blender. Use a measuring cup to portion out 1 cup (230 grams) of unrefined, 100% organic shea butter. Scrape the shea butter out of the measuring cup into a high-powered blender with your fingers or a spoon.[1]
    Make Your Own Body Lotion Step 1 Version 4.jpg
    • Be sure to thoroughly clean and disinfect your blender first!
    • If you plan to make lotion regularly, you may want to buy a dedicated blender for this instead of using your everyday kitchen blender.
  2. Add of coconut oil to the blender. Measure out the coconut oil and dump it into the blender with the shea butter. It's totally fine to use the same measuring cup that you used for the shea butter without rinsing it out first.[2]

  3. Pour in the vegetable glycerin and vitamin E oil. Measure out of vegetable glycerin and dump it into the blender with the shea butter and coconut oil. Then, do the same with of vitamin E oil.[3]

    • Buy vegetable glycerin and vitamin E oil at natural food stores, specialty shops, and online.
    • Get the highest quality products you can afford if you plan to sell your lotion.
  4. Add 2 ounces (60 ml) of extra virgin olive oil to the blender. Measurements don’t have to be precise, but about 2 ounces (60 ml) is recommended. Olive oil is nice and thick, so it’s great for body lotion. However, if you prefer, you can substitute the same amount of:[4]

    • Jojoba oil
    • Avocado oil
    • Sweet almond oil[5]
  5. Blend the ingredients on high speed until they’re fully incorporated. Body lotion is thick, so stop the blender occasionally and scrape down the sides to ensure ingredients distribute evenly. Pulse the blender for 1-2 minutes total. Scrape down the sides a final time once the ingredients are thoroughly blended.[6]

    • Check the consistency by dipping a finger into the lotion and massaging it into your hand. If there are still lumps, blend the mixture for another 1-2 minutes.[7]
  6. Transfer your lotion to a 20 ounce (600 ml) container with a lid. You should be able to pour the lotion straight from the blender into the container, but if you made yours super rich, grab a spoon to help you transfer the mixture. It’s best to store the lotion in an air-tight container, especially if you don’t plan on using the lotion right away. Glass and plastic containers work great.[8]
    Make Your Own Body Lotion Step 6 Version 2.jpg
    • If you’re making lotion to sell, definitely store the lotion in an air-tight container.
    • If you’re making the lotion for yourself, feel free to screw a pump dispenser onto the mouth of the container instead.
  7. Store the body lotion in a cool, dry area for up to 18 months. Since this lotion is oil-based rather than water-based, you don’t have to worry about mold and bacteria growing during storage. However, oil is prone to oxidation and degrades over time. For the best results, use your homemade lotion within 18 months.[9]

    • Be sure to store your body lotion out of direct sunlight.

[Edit]Adding Scent, Color, and Extracts

  1. Add 1 teaspoon (3 ml) of essential oil to the mixture, if desired. If you want to jazz up your lotion with a subtle scent, add your favorite essential oil to the mixture while it’s still in the blender. You can use a single essential oil or a combination of several—it's completely customizable. If you aren’t sure what scents you like, you might try:[10]

    • Lavender oil for a relaxing, slightly herbal scent
    • Rose oil for a classic floral fragrance
    • Citrus oils like sweet orange and grapefruit for a bright, energetic scent
    • Patchouli or cedarwood oil for a deep, woody scent
    • Myrrh, frankincense, or benzoin for a dramatic, resinous scent
  2. Blend the lotion for 1-2 minutes to incorporate the essential oil. At this point, test the lotion on your hand to see how you like the fragrance. If you want a slightly stronger scent, add another teaspoon of essential oil and blend the mixture again. However, avoid using more than a total of 2 teaspoons (6 ml) of essential oil.[11]

    • Essential oil is very concentrated and can irritate the skin if it isn’t properly diluted.
  3. Use skin-safe mica, oxides, and powdered pigments to add color. These products are oil-soluble, so they're perfect for this recipe. Instructions will vary by brand, but the process typically involves dissolving the pigment in oil and blending it into the lotion mixture with the other ingredients. Shop at specialty stores and always check the packaging to make sure products are skin-safe. Keep in mind that adding color only affects the way your lotion looks, so using it is completely optional.[12]

    • Some skin-safe mica formulas can even add a little sparkle to your lotion!
    • Check product instructions for how much pigment to use with the amount of lotion you made.
    • These pigments are potent and intended for use in big batches of lotion. It will be hard to add them to a small amount of lotion.
  4. Add extracts to enhance your lotion with special properties. There are many extracts out there and the properties are different for all of them. You can buy extracts at specialty soap-making and beauty stores. The general usage rate is of extract for every 1 pound (453 grams) of product, so it’s difficult to use them unless you’re making big batches. Check individual instructions for different products for more information. [13]
    Make Your Own Body Lotion Step 11 Version 2.jpg
    • For example, chamomile extract has anti-inflammatory properties and can soothe irritated skin.
    • Green tea extract and aloe extract are skin soothing extracts.
    • Evening primrose and buckthorn extracts are often used for their anti-aging properties.
    • Oat extract soothes irritated skin and is a great option if you have sensitive skin.
    • Mallow extract has intense moisturizing properties.
  5. Add powdered zinc oxide if you want the lotion to have SPF. SPF 20 is a pretty standard amount and offers great daily sun protection. To calculate how much zinc oxide you need to add to achieve SPF 20, multiply the total amount of lotion you have by .20.[14]
    Make Your Own Body Lotion Step 12 Version 2.jpg
    • For example, if you have 4 ounces (113 grams) of lotion, you would use .8 ounces (22.6 grams) of zinc oxide.
    • Use a digital kitchen scale to measure out the zinc oxide for the most precise results. If you don't have a kitchen scale, measuring cups and spoons will work fine.

[Edit]Things You’ll Need

  • Blender
  • Measuring cups and spoons
  • Regular spoon or spatula
  • Air-tight container that can hold 20 ounces (600 ml) of product

[Edit]Related wikiHows

[Edit]References

[Edit]Quick Summary


No comments:

Post a Comment